Yearly Archive: 2015

Wool Coat


This wool coat was born because I had free time in town and I decided to spend in a fabric store. One of my favourite fabric stores in Tallinn, Kangastuudio, had 40% off discount day and so I arrived home with two fabrics in my bag.


Usually I don’t gravitate towards this kind of fabric, I tend to like simple and “boring” fabrics. But this one felt so luxurious, heavy wool with a stretch, that I just couldn’t resist.

First I planned to sew a robe style coat that could be finished quickly. After some consideration and discussion with my mom, who is the best tailor I know, I decided to go for a more sophisticated yet very simple style. I wanted my coat to be without visual pockets, without collar and buttons. I also wished for a straight silhouette.


I combined two patterns. For the back and sleeves I chose the same pattern as for my summer jacket, Burda Style 3/2015. For the front I chose a pattern from Burda Style 12/2012, but didn’t do the waist seam.

Burda Style 3/2015 #105 Asymmetrical Jacket

Burda Style 3/2015 #105 Asymmetrical Jacket


Burda Sytle 12/2012 #104 Long Wool Coat

I was afraid that combining two different pattern is too risky,  but for my surprise I didn’t have to do any changes in the fitting.

For fastening I opted for snap fastening and for the right front I attached the snaps only to the facing. I topstitched the right front close to the snaps to secure it. I like this clean look without buttons!


The only downside of the fabric is that it is so easy to pull the yarns out – I mean the clasp of the handbag or engagement ring – everything gets stuck in the fabric and pulls out the yarn. This is annoying.

But the coat is very warm. For the back and sleeves I added a layer of cotton flannel to protect me from the wind. But it seems that the fabric itself is quite warm as well.


All in all I am pleased with my new coat. I really like the fabric and also because it is a bit out of my comfort zone.

Summer jacket

Eveli_jakk-4Although I write this post in October, I completed this jacket already in June. Lazy blogger :)

The jacket was born out of necessity. Our summer here in Estonia is often called “bad skiing weather” meaning that when going out for a day you can almost never count on your short-sleeved top or dress. But I didn’t have a summer jacket and I am not always into cardigans. So I brought out a fabric thathad been waiting in my stash for years. I had some trouble finding the right silhouette and pattern for this jacket. I didn’t want itto be blazer kind of jacket. When I tried on my 10-year old daughters trench (out of frustration to cheer me up) I shouted “eureka!”. So here is how it looked (I will not try it on again though):

My daughters trench that inspired me.

My daughters trench that inspired me.

Burda Style 3/2015 #105 Asymmetrical Jacket

Burda Style 3/2015 #105 Asymmetrical Jacket



The pattern is from Burda Style 3/2015, but I changed it a bit. I added back yoke, back pleat, different pockets, epaulettes, half cuff straps, collar with stand (it probably has a different name, but I cannot remember at the moment). I also omitted the asymmetrical front.

I like the fabric and the colour, but I wish it had a bit stretch in it. The lining is rayon and striped.  All in all, I think this jacket has a bit of a Burberry vibe going on and I like it :) I also like how this colour suits with light blue and makes it pop. Light blue is sometimes hard to style as it has a tendency to make some colours look muddy in my opinion.

I have to say that I do not like the trousers I am wearing. They were ok when I left home, but after several hours of sitting in the car and in the cinema they stretched out and look like old lady pants. I have already donated them (I bought them second-hand as well).

But I have been loving my jacket – we had an extra cold summer this year, so I wore it a lot.




New dress from Mekkotehdas book


I am a big fan of Finnish blog Mekkotehdas. Few years ago they published their first sewing book of dresses for girls to 128 cm tall. I loved this book! This spring they came out with a new book, Mekkotehdas Aikuisille (Dress factory for grown ups). I met Sunna and Kirsi, the girls behind the blog and a photographer Krista Keltanen in Tallinn, Estonia this week and we had a lovely afternoon wandering around Tallinn Old Town. They also gave me their new book which I was so happy about! Next day, after closing the book I jumped right into sewing. The book was just so inspiring that I had to sew something from it right this moment :)

Mekkotehdas aikuisille raamat-8

I chose the dress Inger from the book and a soft rayon from my stash. Actually, I bought this fabric from Helsinki, Finland, where the authors live :)

According to the measurements given in the book, I should have taken the pattern for size 36 but as usual, I went for a size smaller. This is what I usually do, after measuring the pattern and comparing it with my existing garment, of course.


The only thing I changed was the length. Everything else is like the pattern called. The dress has a zipper in the back but it goes on and comes off even without opening the zipper. As the fabric is quite sheer I added a silk lining. The rayon I used is very soft so I didn’t want to ruin the feeling by adding “cold” lining. Silk feels warm! I used up a silk top I had bought from thrift store with future sewing projects in mind. I often by silk garments from thrift store just because the fabric as the new silk fabric is quite expensive.

Mekkotehdas aikuisille raamat-17





This dress reminds me my high school days back in the nineties:) I used to have similar dress then. This dress is a bit out of the box for me though as I usually tend to choose patterns with fitted bodice. This dress has only bust darts, so it hangs loose and is therefore extra comfortable. For me, this fabric print combined with the pattern has definitely  nineties vibe :)

Mekkotehdas aikuisille raamat-18


About the book. I really enjoy Mekkotehdas style and feeling. Sunna and Kirsi together with photographer Krista take you to a fairytale created for people who love creating beautiful dresses, host cute little parties, walk in the woods and by the seaside… The book is not just about the patterns to make the dresses – it is the feeling you get.

There is about ten dress patterns in this book including one for girls up to 140 cm tall. The book also incorporates instructions for making a make-up bag, a beach tote, scarf with tassels and wrist warmers.


And after closing the book, you genuinely believe that from now on you will only wear cute dresses!

Mekkotehdas aikuisille raamat-1

Mekkotehdas aikuisille raamat-7 Mekkotehdas aikuisille raamat-9 Mekkotehdas aikuisille raamat-10 Mekkotehdas aikuisille raamat-5 Mekkotehdas aikuisille raamat-4 Mekkotehdas aikuisille raamat-3 Mekkotehdas aikuisille raamat-13 Mekkotehdas aikuisille raamat-14 Mekkotehdas aikuisille raamat-15

Mekkotehdas aikuisille raamat-16

Upcycled pullover for my sister

      PulloverI it is a tradition that I make my sister’s birthday present myself. There have been exceptions, but usually I like to make something for her. We are almost the same size so it is easy for me to sew for her.  My sister’s birthday was on last Saturday, so now I can present the pullover I made for her.

Upcycling is something that always excites me. Reet Aus, an Estonian, who made her Ph.D on upcycling, has always been my idol :) Her team is now mass producing upcycled garments in Bangladesh (of garment production leftovers) which is unique in the world.

When I go to the thrift stores, I often pick up items not because I wish to wear them, but because they are made of good quality fabric. I usually pick up all silk items I can find :) I also appreciate (merino) wool, cashmere, linen etc. 

My sister’s pullover is made of men’s merino pullover (with holes) and a silk pillowcase which I once dyed together with some other silks (this is the front piece lining). It used to be just off white. The only new fabric I used is the printed front piece. I decided to line the front piece to make the  pullover warmer. Because when your back and sleeves are covered with merino and your front is covered with thin rayon, your tummy may get cold :)

Keyhole Dress with Ruffled Collar , Burda Style Magazine 02/2014 #126

Can you see the holes in the front?

Can you see the holes in the front?

Püksid ja pluus-7

As the front is non-stretch fabric, I had to use a pattern for non-stretch fabric as opposed to the pattern for jersey. I opted for the Keyhole Dress from Burda Magazine 02/2014. I changed the pattern a bit too. I narrowed the sleeve pattern, as I had stretch fabric for sleeves and I thought it would make a more flattering silhouette that way. I also wanted the bottom part of the pullover to be more slouchy/blousy. Therefore I lined the centre of front and back pattern piece with the folded edge of the fabric, put my finger on the centre neck point so that this part would not move and tilted the pattern further from the fold at the bottom – that way the bottom part went wider while the neckline stayed the same. I hope it makes sense :)

Püksid ja pluus-9

Püksid ja pluus-8

But I started with taking the original merino pullover apart. First step was to unravel the neck binding. Usually this kind of bindings are attached to the garment with chain stitch. So you only need to clip one (and the right!) strand of yarn and when pulling it, the binding unravels giving you a nice binding piece with live stitches on both edges. You can use them to stitch the binding to your new garment. It is time-consuming as you can do it only by hand and you have to stitch public side and inside separately (in the garment industry, they have special equipment and technology to stitch the binding through the garment with one go).

I also hand stitched the zipper as I was absolutely sure that when I start machine stitch it, I will mess it up. I don’t mind hand-stitching at all, I find it very relaxing and it gives a little more something to the garment I think.


I hand stitched the binding using the yarn that I unraveled from the neck binding. I steam-ironed it to ger rid of the curls :) But first I basted the binding in place.


I also covered the zipper tape with the print fabric tape to give a bit more luxurious feeling :) This is also hand-stitched.

Püksid ja pluus-26 Püksid ja pluus-27


The front is lined with the silk to give warmth. The silk also feels very nice against the skin.



I am happy with the result. So is my sister. Today she sent me a message saying that she is wearing the pullover right now and it feels so soft and warm! That makes me happy. And you do not get this kind of happiness when you buy and give something. This is why I like to make the presents for  my special people myself :)

Alexandria Peg trousers from Named Clothing


Püksid ja pluus-23

Some time ago I visited the Named Clothing page  to take a closer look at their famous Jamie Jeans pattern. I don’t know why, but I have this urge to make my own jeans :) But then I found out that Named had published their new spring/summer collection called Ticket from where I found Alexandria Peg Trouser pattern. Peg trousers are my other obsession. It is hard to find a pattern, that fits right. Alexandria pattern seemed the closest what I had in mind – not too baggy at the leg, quite fitted around bottom :)

Püksid ja pluus-20

So I bought the Alexandria Peg Trousers pattern and with the help of my nine-year old daughter, we assembled the pattern. So far, the only print-at-home PDF patterns I have worked with are the Sewaholic ones. When assembling the pages I am always confused – you have to cut the excessive paper to tape the pages together. But should the frame be cut away, cut in the middle of or should the frame be incorporated? In other words, when the pattern is taped/glued together, should I see the frames of the pages? Because I find it hard to match the patterns – I usually have to cut some pages in half between the actual pattern pieces to get both pieces right.

Püksid ja pluus-5

The Named patterns are for “average” height woman who is 172 cm. As I am short, I decided to  shorten the pattern body and leg.  I made the mistake of choosing a geometric pattern fabric for muslin. The pattern was too distracting and I somehow didn’t see the fitting issues with the muslin. Shortening the pattern in the body part wasn’t the right decision, so when cutting pieces out from the fabric I lengthened the pattern back :)

Püksid ja pluus-19

The main fitting issue with these trousers were diagonal lines starting from inseam and going up towards the side seam. I am terrible at fitting pants, but I figured out, that the problem is too long inseam/too short side seam. As I couldn’t lenghten the side seam, I scooped the centre front and back waistline (quite dramatically, 4-5 cm) and also deepened the crotch.  That made the situation better but not perfect. I decided to leave them as they are – not perfect, because there wasn’t anything else I could do.  When I was ready to do the hemming, I decided to make cuffs to make the trousers full length instead of cropped. I got myself white sneakers which I had been craving for and I thought they would look great with my new trousers when they are full length.

I am in love with the front pockets and how the pleat covers the pocket opening. Well, I love everything about this pattern, it is just pity that my body type is not standard they consider.

Püksid ja pluus-24

The fabric is really nice rayon/polyester crepe, BUT when I started to cut out the pattern pieces, I noticed that my hands where dyed grey. So I removed all the pattern pieces and washed the fabric. But nevertheless my hands where dyed bluish-grey afterwards when I were constructing the trousers. So later I washed the trousers two times and then soaked in salty water to fix the die. I am crossing my fingers that they will not dye my new white trainers!

Püksid ja pluus-12
Püksid ja pluus-13

My next goal is to find a trouser pattern that I am satisfied with. I am thinking making myself a foolproof pattern so I don’t have to trial and error every time. Fitting pants is not my favourite :)  I sill have the jeans making urge, but I am not sure whether to use some Burda Style pattern or try the Jamie Jeans or maybe Ginger Jeans?

Named Clothing Jamie Jeans

Closet Case Patterns Ginger Jeans

Burda Style Magazine 3/2014


I usually like to wear jeans but for some reason I just love to sew dresses. Maybe because it is quite difficult to find a RTW dres that fits your top and bottom when you don’t have standard measurements.

My daughter is better at wearing dresses and she really needed one as she has grown and I haven’t made her a dress for a while now.

So I got my act togther and made two dresses :)

1. My dress.


Photo: Burda Style Magazine 12/2012

Photo: Burda Style Magazine 12/2012

I had my eye on the dress pattern in Burda Style magazine 12/2012 for long time. I thought that the combination of the gathered skirt part and tweed fabric was quite unusual and not the best idea, but I really liked it anyway :)

I didn’t want a fabric so bulcky, so I opted for lightweight wool blend that I found in fabric store in Tallinn.

I decided to make the dress button up and collared. As the button band goes only to waist, I added a zip to side seam and omitted the back zip. After first fitting I wasn’t too happy and I had to make a lot of changes – change the shoulder (as my shoulders are quite slanted), take in from the back, add an extra vertical darts. I also changed the skirt part (I did it 5 times in total!). I ended up cutting the skirt part as a rectangle because the original pattern gave me wings and it wasn’t a flattering shilouette.

I lined only the skirt part leaving the top unlined. I didn’t change the sleeve except omitting the zips. For the collar, I used a random pattern that I redrafted as I wanted to make a collar with rounded corners and a collar stand.

All in all I am pleased with the dress. It is comfortable, doesn’t wrinkle and is warm.




2. Dress for my daughter.


For my daughter’s dress I chose I plaid cotton from my stash. I used the pattern from Burda Style Magazine 6/2010. I had to alter it as it was only for size 128 cm. So I combined it with a dress pattern from Burda 2/2013.

Photo: Burda Style Magazine 6/2010

Photo: Burda Style Magazine 6/2010

I lined the body part so that the dress would be more comfortable to wear with tights.




Maibrit's dress

We made the ribbon-rhinestone embellishment together. We thought that the dress is missing something without it :)

And I haven’t got over the exposed zipper trend!


Maibrit's dress